E-Markings and R-Codes Explained

  • Jesper Spreeuwers
  • 10/01/2026
E-Markings and R-Codes Explained

Anyone reviewing the specifications of a work light, headlight, or other vehicle lighting will encounter a range of letters and numbers on the lens or housing. Codes such as E-marking, R10, R149, HCR or PL appear regularly. Understanding what these markings mean is essential for dealers and technical staff when specifying products, advising customers, or verifying road legality.

This article provides a clear and practical explanation of each code, so the relevant information can be read directly from a lamp's markings.

Quick overview

  • The E-marking confirms that a lamp has been approved under European vehicle lighting regulations
  • The number after the E indicates the country in which the approval was granted
  • R-codes indicate which regulation a lamp has been tested under and what it is approved for
  • R10 relates to electromagnetic compatibility (EMC)
  • R148 and R149 relate to different categories of vehicle lighting
  • HC, HR and HCR indicate which functions a headlight has, such as low beam and high beam
  • The reference number provides information about the intensity of the high beam
  • PL indicates that the lens is made of plastic

What Is the E-Marking?

The most important marking on vehicle lighting is the E-marking. It appears as an E inside a circle or rectangle, followed by a number.

The letter E confirms that the lamp has been tested and approved under European vehicle lighting regulations. The number indicates the country in which the approval was carried out. For practical purposes, the country of approval makes no difference: a lamp carrying an E-marking may be used throughout the European Union.

The E-marking is the official confirmation that a lamp meets European requirements for use on public roads.

E-Number Overview: Country of Approval

E-numberCountry of approval
E1Germany
E2France
E3Italy
E4Netherlands
E5Sweden
E6Belgium
E7Hungary
E8Czech Republic
E9Spain
E11United Kingdom
E12Austria
E13Luxembourg
E14Switzerland

What Is an R-Code?

Alongside the E-marking, a lamp will typically carry a code containing the letter R, such as 10R06 or 149R00. The R-code indicates which regulation the lamp has been tested under and what it is approved for.

The digits before the R refer to the European regulation number, indicating the category of lighting. The letter R stands for Regulation. The two digits directly after the R indicate which version of the regulation was used during testing. The higher this number, the more recent the requirements against which the lamp was tested.

Following this code is a longer number: the unique approval number assigned to that specific lamp model by the testing authority. This allows the approval to be traced back to the exact test and model.

Reading an R-Code: A Practical Example

Take the code 10R06 22407:

  • 10 — the lamp falls under regulation R10, meaning it has been tested for electromagnetic safety and must not cause interference to vehicle systems such as radio, electronics, or airbag systems
  • R — the lamp is approved under European regulation
  • 06 — the lamp was tested against version 06 of this regulation
  • 22407 — the unique approval number for this specific lamp model

The Most Important R-Codes Explained

R10 – Electromagnetic Compatibility

R10 means a lamp has been tested for electromagnetic compatibility (EMC). It must not cause interference to the electronic systems of the vehicle, including airbag systems, on-board computers, radio and DAB reception, GPS, or ISOBUS. For work lights, R10 is typically the only mandatory certification, as these lamps are not classified as road lighting but must operate safely alongside vehicle electronics.

R148 – Signal Lighting

R148 covers lamps used for signalling functions, including indicators, position lights, brake lights, daytime running lights, reversing lights, and rear fog lights. This regulation replaced a number of older individual regulations (R4, R6, R7, R23, R38, R87, R91 and others).

R149 – Road Lighting

R149 applies to lamps intended for use on public roads that illuminate the road ahead of the vehicle. This includes front fog lights, low beam (both symmetrical and asymmetrical), high beam, and cornering lights. R149 replaced a number of older regulations including R112 and R113. A lamp carrying R149 approval is certified for use as road lighting during driving on public roads.

R-Code Regulation Overview

Signal Lighting

Previous codeCurrent codeApplication
R4R148Rear number plate lighting
R6R148Indicators / direction signals
R7R148Front and rear position lights, brake lights and contour lights
R23R148Reversing lights
R38R148Rear fog lights
R87R148Daytime running lights (DRL)
R91R148Side marker lights

Road Lighting

Previous codeCurrent codeApplication
R19R149Front fog lights
R112R149Headlights with asymmetric low or high beam
R113R149Headlights with symmetric low or high beam
R119R149Cornering lights
R123R149Adaptive front lighting systems

Beam Function Codes: HC, HR, HCR and HC/R

In addition to the E-marking and R-code, headlights may carry codes such as HC, HR, HCR or HC/R. These indicate which light function the headlight provides.

CodeMeaningDescription
HCLow beam onlyApproved for low beam for standard driving
HRHigh beam onlyApproved for high beam for maximum illumination
HCRLow beam and high beamBoth functions can be used simultaneously
HC/RLow beam or high beamFunctions cannot be used simultaneously

The Reference Number: High Beam Intensity

Close to the E-marking, a two-digit number is often present, such as 12, 15 or 45. This is the reference number, indicating the intensity of the high beam. It can be understood as a light value showing how much a lamp contributes to the total high beam intensity of the vehicle.

European regulations specify that the combined reference number of all high beam lamps on a single vehicle must not exceed 100. This includes both standard headlights and any additional spotlights or supplementary high beam lamps mounted on the vehicle.

When a vehicle carries multiple high beam sources, all reference numbers are added together. For example:

  • Standard headlight left: 15
  • Standard headlight right: 15
  • Additional spotlight left: 45
  • Additional spotlight right: 45

Total: 15 + 15 + 45 + 45 = 120 — above the permitted limit of 100 and therefore not road-legal.

This regulation exists to prevent vehicles from emitting excessively bright light that could dazzle other road users.

PL: Plastic Lens

The letters PL on a lamp indicate that the lens is made of plastic. PL stands for Plastic Lens. Modern lamps use high-grade plastic rather than glass as standard. Plastic is lighter, more resistant to stone impact and better suited to the vibration and intensive use typical of agricultural vehicles.

What This Means in Practice

All markings on a lamp indicate whether it is road-legal, what it is approved for, and whether it operates safely alongside the vehicle's electronics. Understanding these codes allows dealers to specify products correctly, verify compliance, and advise customers with confidence.

All CRAWER products carry the relevant certifications for their intended application. Full certification details are available on each product page and in the technical documentation. For specification support or compliance questions, contact your CRAWER account manager.

Frequently asked questions

The E-marking confirms that a lamp has been tested and approved according to European vehicle lighting regulations. The number following the E indicates the country where the approval was granted. An E-approved lamp can be used throughout the European Union, provided it is approved for the intended lighting function.
R10 indicates that a lamp has been tested for electromagnetic compatibility (EMC). This means it is designed not to interfere with vehicle electronics such as radio, GPS, DAB, ISOBUS, on-board computers and other electronic systems.
R148 applies to signal lighting, such as indicators, position lights, brake lights, reversing lights and daytime running lights. R149 applies to road lighting that illuminates the road ahead, including low beam, high beam, front fog lights and cornering lights.
These codes indicate the approved beam functions of a headlight. HC means low beam only, HR means high beam only, and HCR means the lamp provides both low and high beam functions that can be used simultaneously. HC/R also provides both functions, but they cannot be used at the same time.
The reference number indicates the intensity of the high beam. When multiple high beam lamps are installed on a vehicle, their reference numbers must be added together. Under European regulations, the combined reference number of all high beam lamps may not exceed 100.
Check the markings and certifications listed on the product page or in the technical documentation. Road lighting generally requires the appropriate E-marking and R149 approval for its specific function. CRAWER provides the relevant certification information for each product.

Do you have any questions about this article?

Our team is available Monday to Friday, from 08:00 to 17:00 CET. Contact us using the details below or submit your question through the contact form on our contact page. We will be happy to help.

Jesper Spreeuwers

dealer.support@crawer.eu +31 (0) 850449308
Work lights
Headlights
Work Lights Budget
Position Lights
Headlight units
Markerlights
Visual Warning Lights
Charging Accessories
Handheld Work Lights
See all products within Handheld Work Lights
Adapter Cables
Adapter Plates
Connectors
Electrical Components
Mounting Hardware
Spare Parts
Splitter Cables
See all products within Instal & Connect
Innovation Hub
LED Configurator
Contact
NewsAbout usContact

Login

Welcome back
Forgot password?

Don't have an account yet?

Sign up and enjoy the benefits of your account.

  • CUSTOM!
  • CUSTOM!
  • CUSTOM!
Create an account

Questions, advice or need help?

CUSTOM!
Available from Monday to Friday from 9:00 am to 9:00 pm. Or mail to hello@yourdomain.com
Loading